At this page you can change CD-drive, enable/disable autodetection of Audio CD and choose method of jitter's correction usage.

CD-drive combobox is located at the top of this page. You may grab from only one CD-drive per time. You may change CD-drive using that combobox.

Read method should be set to represent the type of CD-Drive present on the system. To attempt to autodetect the proper read function, select Autodetect. For IDE drives (or SCSI drives that support MMC-2), you should almost always select ATAPI (1) or ATAPI (2). For SCSI drives, it will vary according to the specific drive.

Check/uncheck "Auto detect drive with Audio CD (on startup)" to enable/disable autodetection of Audio CD. On startup when this option is enabled then first drive containing Audio CD will be selected in CD-drive combobox. Otherwise, last drive used by Amazing CD Ripperwill be selected.

When "Auto refresh on insertion/removal of disk" is checked program determines insertion/removal of disk and refreshs information about disk. It's very helpfull during grabbing of multi CD's (in this case to start ripping of next disk to you it is necessary simply to insert disk into the CD-drive).

Program tries to get info about disk via Internet before grabbing of next disk when "Get CDDB info before grab (for grabbing multi CD's)" is checked. This options works in the mode of grabbing multi CD's .

When "Get CDDB info for new disk" is enabled program gets CDDB info automatically for inserted audio disk.

Some audio encoders (such as MP3 and OGG) are very slowly. When ripping and converting, the laser has to remain on one spot longer, since the converting takes more time than the ripping. This is not very healthy for the laser, and the CD-drive. To avoid it check "Rip with maximal speed (rip to memory)". Amazing CD Ripperwill rip track to buffer in memory with maximal speed and at the same time will encode to selected format from buffer.

When "Eject disk after completion" is enabled Amazing CD Ripperejects disk after completion of ripping process.

Using radiobuttons you choose method of jitter correction's usage.

Related Topics: Settings.