- How to convert DVD to VCD?
- How to convert DVD to SVCD?
- How to convert DVD to AVI?
- How to convert DVD to MPEG?
- What's the system requirements?
- What's the ISO file?
- How to convert the ISO to VCD/SVCD?
- How to convert DVD to VCD/SVCD with a bin
file?
- How to do when get error message "MPEG2Dec:
Error during decoder initialisation"?
- How to do when meet error message "Unable
to read from D:\VIDEO_TS\vts_01_1.vob"?
- Where can I get a DVD region free software?
- Why are there different DVD Disc regions?
- What does the region code affect the end
consumer?
- How can I know what region code a dvd disc
is?
- Why the sound is abnormal when being played
in this software?
- Why the preview window shows incorrectly
when converting?
- How to solve the following error "the ordinal
11 could not be located in the dynamic link library DSound.dll"
?
- Why the option "All Chapters" is disabled?
- Why all the options in "Split" frame are
disabled?
- I have a question not listed in the above.
-
How to convert DVD to VCD?
Step 1, Lauch the software.
Step 2, Click the "Open DVD..." button to open the DVD movie.
Step 3, Set the output format to VCD.
Step 4, Click the button "..." from the "Save As" column to
set a file name. The file may be ISO or BIN according to your
choice.
Step 5, Click the button "Convert...".
Step 6, If you want to convert all the chapters, set the radio
button to "All Chapters", otherwise, please set it to "Select
Chapters", then click the button "Select..." to enter the
window for selecting chapters for converting.
Step 7, After the above steps, click the button "Convert",
it will start converting.
-
How to convert DVD to SVCD?
Step 1, Lauch the software.
Step 2, Click the "Open DVD..." button to open the DVD movie.
Step 3, Set the output format to SVCD.
Step 4, Click the button "..." from the "Save As" column to
set a file name. The file may be ISO or BIN according to your
choice.
Step 5, Click the button "Convert...".
Step 6, If you want to convert all the chapters, set the radio
button to "All Chapters", otherwise, please set it to "Select
Chapters", then click the button "Select..." to enter the
window for selecting chapters for converting.
Step 7, After the above steps, click the button "Convert",
it will start converting.
-
How to convert DVD to AVI?
Step 1, Lauch the software.
Step 2, Click the "Open DVD..." button to open the DVD movie.
Step 3, Set the output format to AVI.
Step 4, Click the button "..." from the "Save As" column to
set a file name. The file's extension name should be ".AVI".
Step 5, Click the button "Convert...".
Step 6, If you want to convert all the chapters, set the radio
button to "All Chapters", otherwise, please set it to "Select
Chapters", then click the button "Select..." to enter the
window for selecting chapters for converting.
Step 7, You must choose an appropriate video codec from the
column "AVI Output Parameters".
Step 8, After the above steps, click the button "Convert",
it will start converting.
-
How to convert DVD to MPEG?
Step 1, Lauch the software.
Step 2, Click the "Open DVD..." button to open the DVD movie.
Step 3, Set the output format to MPEG.
Step 4, Click the button "..." from the "Save As" column to
set a file name. The file's extension name should be ".MPEG"
or ".MPG".
Step 5, Click the button "Convert...".
Step 6, If you want to convert all the chapters, set the radio
button to "All Chapters", otherwise, please set it to "Select
Chapters", then click the button "Select..." to enter the
window for selecting chapters for converting.
Step 7, You must choose the output MPEG format as MPEG-1 or
MPEG-2.
Step 8, After the above steps, click the button "Convert",
it will start converting.
-
What's the system requirements?
To use Flash DVD Ripper, your computer must meet the following
requirements,
* Installed Windows system (maybe 98, Me, NT, 2000, XP, or
2003)
* At least 1GB free space for saving the converted file
* Intel Pentium III CPU or the same of AMD
* DVD-ROM for reading DVD Movie from DVD disc
-
What's the ISO file?
When converting DVD to VCD or SVCD, the software will save
the converted file to ISO as default. Then you may burn the
ISO file to an empty disc by your CD burning software like
"Nero Burning" or "Roxio Easy CD Creator".
You may also set the software to save as BIN/CUE file by rename
it from the "Save As" dialog.
-
How to convert the ISO to VCD/SVCD?
The ISO file is an image of VCD or SVCD. You may use CD burning
software like "Nero Burning" or "Roxio Easy CD Creator" to
burn the ISO file to an empty disc.
-
How to convert DVD to VCD/SVCD with a bin
file?
Besides ISO file, you may also set the output to BIN/CUE file
when converting DVD to VCD or SVCD. You need only click the
button "..." to save as "BIN/CUE". The result will include
2 files with extension ".bin" and ".cue". Some cd burning
software will support burning BIN/CUE file as VCD/SVCD, but
not all cd burning software supports it, this format is not
as popular as ISO.
-
How to do when get error message "MPEG2Dec:
Error during decoder initialisation"?
It may because that your DVD disc is from a region limited
by your DVD-ROM. You may try to install a DVD region free
software to make your DVD-ROM can read the DVD disc.
-
How to do when meet error message "Unable
to read from D:\VIDEO_TS\vts_01_1.vob"?
The same as the above question, it may because that your DVD
disc is from a region limited by your DVD-ROM. You may try
to install a DVD region free software to make your DVD-ROM
can read the DVD disc.
-
Where can I get a DVD region free software?
You may get one by click
here. Or you may search
google with keyword "DVD region free".
-
Why are there different DVD Disc regions?
Motion picture studios in the USA want to control the release
of movies around the world using different DVD regions codes.
Movies are released on DVD at different times around the world,
typically America and Canada first, Australia and Japan 6
months later, and Europe 12 months after US release. In some
instances, DVD movies are available for purchase in America
and Canada before they are released in European cinemas. Due
to the high quality of DVD and the movie release system used
by Hollywood, 6 regions were established to prevent people
from watching Region 1 movies before they were released on
Regions 2 to 6.
DVD Region Locking is a system used to control which DVD movies
play on which DVD Players. The regions are broken down as
follow:
Region 1 - The U.S., U.S. territories and Canada
Region 2 - Europe, Japan, the Middle East, Egypt, South Africa,
Greenland
Region 3 - Taiwan, Korea, the Philippines, Indonesia, Hong
Kong
Region 4 - Mexico, South America, Central America, Australia,
New Zealand, Pacific Islands, Caribbean
Region 5 - Russia (okay, former Russia), Eastern Europe, India,
most of Africa, North Korea, Mongolia
Region 6 - China
-
What does the region code affect the end
consumer?
This means that movies from Region 1 (USA & Canada) will not
play on a DVD player regions 2-6. Effectively Region 1 discs
play only on Region 1 DVD players, Region 2 discs play only
on Region 2 DVD players and so on.
-
How can I know what region code a dvd disc
is?
The region code is usually specified on the back of the individual
DVD packages, either with a Regional Coding logo of a globe
with the region number superimposed over it, or specifically
spelled out. For example, while currently-released New Line
and Warner DVD titles use the globe logo & number scheme,
MGM/UA titles state: "This disc has been encoded for Region
1: The United States, U.S. Territories and Canada." In the
cast of Lumivision's discs, they are labelled "Available worldwide,"
which means that the discs contain no regional coding and
will play on any players in any countrys.
-
Why the sound is abnormal when being played
in this software?
Because we do not use hardware acceleration technology in
the software, so the sound may not abnormal if your computer's
hardwares are not good enough. But never mind, although the
sound problem, the converted video has no problem.
-
Why the preview window shows incorrectly
when converting?
When converting DVD to other video formats, the preview window
may show incorrectly, but never mind, the converted video
has no any problems. It's just a problem of refreshing.
-
How to solve the following error "the ordinal
11 could not be located in the dynamic link library DSound.dll"
?
Flash DVD Ripper assumes that you have installed the
latest version of DirectX sound software. It needs a specific
function (Ordinal 11) from a specific library (error in finding
the DLL).
When this error message appears, it means that you need to
install DirectX SDK to your computer.
Install the latest DirectX version from Microsoft:
http://www.microsoft.com/windows/directx/default.aspx
If you do not want to install the DirectX, you may also try
the following steps,
- Step 1, download this new version file "dsound.dll"
to your computer. Download
it
- Step 2, reboot your computer and enter in safe mode.
- Step 3, rename the old file "dsound.dll" under the windows'
"System32" folder to another file name for backup.
- Step 4, copy the new downloaded file "dsound.dll" to
the windows' "System32" folder.
- Step 5, reboot your computer.
-
Why the option "All Chapters" is disabled?
This is a limitation of trial version. If you ordered a full
version, you may uninstall the trial version and install the
full version we had sent to you. The option will be enabled.
-
Why all the options in "Split" frame are
disabled?
Only when the option "All Chapters" is selected, these options
would be enabled for selection. If what you are using is a
trial version, the "All Chapters" would be disabled, and these
options would accordingly unuseable.
- I have a question not listed in the
above.
You may send your question to this email address:
support@flashdvdripper.com
We will try to answer your question within 24 hours.
|
