|
|
Make sure you
have a working ASPI layer!This techno-speak
means that the software that allows your computer to "talk"
with scanners and CD-recorders may not be configured correctly
or is not up to date! What can you
do? Try these options, ONE at a TIME.
| 1. |
Starting with version 3.01 build 66, we no longer include
the Gear burning engine in the main download.
You should try installing the Gear drivers for
Acoustica MP3 CD Burner. Note that this
may require a restart of your computer.
Download Gear engine & drivers for Acoustica MP3
CD Burner
Note that this requires that Acoustica MP3 CD Burner
version 3.01 or 4.0 to be installed already.
After it downloads, run it and then click
"Setup". After it finishes, you will be
asked to restart the computer. Restart
and run Acoustica MP3 CD Burner.
|
|
| 2. |
**The following applies if you are using the Goldenhawk
engine.** Switch the ASPI layer.
(No additional downloads necessary.) In
Acoustica MP3 CD Burner, click the Preferences
from the File menu. Click on the "General"
tab and toggle the "Use Acoustica ASPI" to be
unchecked or checked. (The opposite of what
it was before.) Click OK and you'll have to restart
the program. Hopefully, when you restart
MP3 CD Burner, you'll see your CD drives and CD
burner! |
|
| 3. |
**The following applies if you are using the Goldenhawk
engine.** You may need to install another
ASPI layer. We recommend that you re-run
the Acoustica MP3 CD Burner installer and on the
"Optional ASPI Layer Installation" page, check
both ASPI options (Acoustica & Adaptec) and
proceed with the installation. You will need
to reboot. If it still doesn't recognize
the ASPI layer, try step 1 again. If do
not remember where the installer is,
11/05/02 - Acoustica ASPI drivers provided by Nexitech!
This will help with the memory leak and other
performance issues when using "Acoustica ASPI".
|
|
| 4. |
For Win95 ONLY!!!
**The following applies if you are
using the Goldenhawk engine.** |
| A. |
Go to Adaptec's page @ http://www.adaptec.com/worldwide/support/driverdetail.html?filekey=aspi32.exe |
| B. |
Download and install aspi32.exe. Note that
Adaptec will install this if you have
Adaptec hardware or software. |
| C. |
Restart your computer |
| D. |
Re-run MP3 CD Burner to see if it recognizes the
recorder yet. |
| E. |
Make sure that you have unchecked the "Use Acoustica's
ASPI driver" and restart the software
as necessary. (See the above image.) |
|
|
|
| |
| 5. |
For Win
NT, 2000 or XP ONLY!!
**The following applies if you are using the Goldenhawk
engine.**
- Download the Desernet Broadband Media, Inc driver (wnaspint.dll)
- Place the wnaspint.dll in your Windows/System32 directory
- Restart MP3 CD Burner to see if it recognizes the recorder
yet.
|
| |
|
|
|
| |
|
|
