• MP3 / OGG / WMA to WAV

An ease and quick MP3 / OGG / WMA to WAV converter.

Use the same windows as the WAV Normalizer. But you can uncheck the 'Normalize to', while in the WAV Normalizer, 'Normalize to' is disable and it must be checked. When the 'Normalize to' is unchecked, the 'Enable Fade In/Out' is unchecked and disable accordingly.

1. On main windows, click File > MP3 / OGG / WMA to WAV.
2. Change the value of 'Normalize to' to control the volume of your created files. If the value is smaller than 50, the volume is lower than original file, if larger than 50, the volume is higher than original.
3. Check / uncheck 'Enable Fade In/Out' to add/unadd fade in/out of your created files.
4. Set the frequency, or number of times an event repeats, or number of vibrations procuced by a signal or sound, in a given period. Frequency is measured is Hz. One Hertz is one cycle per second. In Ease Jukebox, the settings are listed in kHz, or kilohertz. The value you can choose from is 48,000 Hz, 44,100 Hz, 32,000 Hz, 24,000 Hz, 22,050 Hz, 16,000 Hz, 12,000 Hz, 11,025 Hz, 8,000 Hz, 6,000Hz.
5. Set a channel, such as mono or stereo. A stereo signal consists of two separate audio channels, while mono signal has one. A signal audio file may contain information for one, two, or in some cases, more audio channels. This means that stereo produces better quality sound.
6. Bit per sample: The more bits used to store each sample in digital form, the more thorough the original signal's amplitude can be represented. This in turn may result in higher audio quality in the system. However, the more bits used per sample, the larger the digital audio data size.
7. Click 'Select Directory' button to choose the folder where you want to save you created WAV files.
8. Click 'Add' button or click File > Add to add the WAV files you want to convert.
9. Click 'Delete' button or click File > Delete File Record to delete the files you have selected from the filelist. Multi-select is supported. You can select more than one file by pressing the Ctrl key while clicking the files or pressing the Shift key and using the arrows to select a range of files. Your files will not be really delete from your computer.
10. Click 'Clear' button or click File > Clear File Record to clear your filelist. Your files will not be really delete from your computer.
11. Click 'Start' button or click Action > Start to begin your conversion.
12. Click 'Stop' button or click Action > Stop to stop your conversion.
13. If you are not satisfied with your setting and want to use default setting, just click 'Default' button. By default, fade in time is 10s, fade out time is 20s, WAV format is 44,100 Hz; 16 Bit; Stereo.

Attention:
1. You can add MP3 or OGG or WMA files.
2. step 2-6 must be done before step 11.
3. Protected WMA files cannot be converted since they are locked.