MP3 RM Converter supports converting your WAV, WMA and OGG files to MP3 files.
To convert to MP3, just do as below:
1. Add files you want to convert.
2. Do your settings. You can set the parameters by yourself. Just click "Settings" button and active the "MP3 Setting" page, then you can do your settings. If you are not satisfied with your setting and want to use default setting, just click 'Default' button. By default, Frequency is 44,100Hz, Channel is Stereo, Bitrate is 128kb, Quality is 8, VBR Bitrate is 128kb, VBR Quality is 8. Remember to click "Ok" button after your settings.
3. Click "To MP3" and then the conversion will begin. To terminate the conversion, click "Stop" button.

Notice:
1. After clicking "To MP3", if a message as "Don't support this MP3 format, please reset." appears, it because you have set high frequency and low bitrate or have set low frequency and high bitrate. For example, you have set to frequency 48KHz, bitrate 32Kbps. If so, please low the frequency or high the bitrate.
2. VBR stands for "Variable Bit Rate". Using VBR will allow the sampler to vary the bit rate depending on the profile of the incoming audio signal.
3. Protected WMA files cannot be converted since they are locked.