WAV MP3 Converter supports converting your WAV, MP3 and WMA files to OGG files.
To convert to OGG, just do as below:
1. Click "Add File" button to add file you want to convert. Multi-add is supported.
2. Do your settings. You can set the parameters by yourself. Click "Set" button or click "Settings" on the main menu, active the "OGG Setting" page, then you can do your settings. If you are not satisfied with your setting and want to use default setting, just click 'Default' button. By default, Frequency is 44,100Hz, Channel is Stereo, Bitrate is 128kb, VBR Max Bitrate is 128kb, VBR Min Bitrate is 128kb, VBR Quality is 600, disable VBR and VBR Quality. Remember to click "Ok" button after your settings.
3. Choose "OGG" in Output Format.
4. Click "Convert" and then the conversion will begin. To terminate the conversion, click "Stop" button.

Notice:
1. After clicking "To OGG ", if a message as "Don't support this OGG format, please reset." appears, it because you have set high frequency and low bitrate or have set low frequency and high bitrate. For example, you have set to frequency 48KHz, bitrate 32Kbps. If so, please low the frequency or high the bitrate.
2. VBR stands for "Variable Bit Rate". Using VBR will allow the sampler to vary the bit rate depending on the profile of the incoming audio signal.
3. If you check "Enable Quality", you can use any available values for Bitrate, MinBitrate and MaxBitrate. This parameter affects the convertation speed and the quality of the result file. But any value of Quality is correct for the convertation with any available combination of other parameters.
4. Protected WMA files cannot be converted since they are locked.